Pixel
The discrete, photosensitive silicon physical detector element on a digital sensor that captures incoming cosmic photons and converts them into an electrical charge.
Each pixel acts as a micro-well with a finite Full Well Capacity (measured in electrons, e⁻). When photons strike the silicon substrate via the photoelectric effect, they generate electron-hole pairs that are digitized by the Analog-to-Digital Converter (ADC) into discrete ADU values. The physical size of the pixel directly dictates my optical sampling rate in arcseconds per pixel ("/px).
When I pair my TS CF-APO 130mm refractor (native focal length of 910 mm) with the ZWO ASI2600MM camera (featuring a 3.76 µm pixel size), my optical sampling rate calculates to roughly 0.85"/px via the formula (3.76 ÷ 910) × 206.265. In practical astrophotography, matching this scale involves balancing against local seeing conditions: undersampled setups exceed 2.0"/px (leading to blocky stars), an oversampled regime drops below 0.8"/px (diluting signal and stretching integration times), and a well-balanced / critically sampled regime sits ideally between 1.0" and 2.0"/px (or one-third to one-half of average seeing FWHM). At 0.85"/px, my setup sits squarely in a high-performance regime that exploits the pristine optical resolution of the FPL55 triplet glass without severe undersampling, while maintaining robust signal accumulation that PixInsight drizzle integration can leverage for microscopic structural detail.